How to Fix a Toilet That Won't Stop Flushing
Many toilets in commercial buildings are controlled by a device known as a flushometer. While these devices usually work quite well, they are still prone to malfunctioning. This can cause toilets to engage in a never-ending flush cycle, ultimately driving up your water bill and resulting in damage from toilet overflow. If your building in West Miami, FL, is suffering from this affliction, consult the following guide.
Step-by-Step Toilet Repair Guide
Repairing a toilet is a relatively simple process, even if you have very little plumbing experience. Follow this guide to stop a toilet flood:
- Use a flat screwdriver to shut off the water. There should be a slot on either side of the flushometer, depending on which direction it's facing.
- Use a wrench to loosen the flushometer's top lid. After this, you should be able to unscrew the lid using your hands.
- Carefully remove the flange cover to expose the gasket. You may experience some water spray while performing this step.
- Remove the gasket and clean out any built up sediment. It's a good idea to thoroughly rinse the gasket as well. Use a small, thin object to clean out the weep hole as well.
- Replace the gasket after you finish cleaning it and reverse steps 1 through 4 to reassemble the flushometer.
If the above steps do not resolve your toilet overflow problem, you may have to replace the gasket completely. If your toilet still isn't working properly, you may have to contact professional plumbers to assist you with the issue.
A continuously flushing toilet can drive your water bill up, as well as annoy your employees and drive customers away. It's imperative that you resolve any toilet overflow issues as soon as possible so that you can resume business as usual. If your commercial bathroom has suffered any type of water damage as a result of the toilet flood, you need to contact flood remediation experts to help resolve the problem.